Rainy Buttes knife w/Spalled Maple Handle

$ 119.00 USD

Rainy Buttes Blade is nicely flaked, has earthtone browns and tan stripes which are enhanced by the mineral lines in the Spalled Maple handle.  Blade is about 4 3/4 inches long.  Overall length of the knife is almost 9 1/2".  Price includes a wooden display case and shipping to your USA address.  

 

Item # 274-KN00113. 

Knife with Whitetail Burr Handle  OAL 7 3/4" 

Knife blade is Smoke Obsidian with dark banded lines through the length of the blade.  Deer horn handle has beautiful natural markings with a full set of burrs around the base.  Blade is approximately 4" long;  the Handle is approximately  3 3/4" long.  In addition, the knife blade is offset about 25 degrees to the centerline of the handle.  The included base of natural driftwood makes a wonderful display setting for this knife.

Originally priced at $49 plus shipping...now

$30.00 plus $9.00 for Priority Mail Shipping to US addresses
                             Part#273-KN004

View Larger Image

SOLD




Skinning Knife Dark Banded Obsidian Blade

$ 120.00 USD

The blade is of dark banded smoke obsidian and is 4 3/4" long.  It is nicely shaped, flaked and has a piercing point.  The Wendon Marble handle is shaped and polished to blend nicely with the blade.  Overall length of the knife is 8".  Price of $120 includes a wooden display case and shipping to your USA address.  Part#273-KN0017.

_____________________________________________________________________________

Large 13" Knife w/Display Case

$ 200.00 USD

The 7 5/8" long blade is made of Frosted Art Glass.  Is nicely flaked and shaped.  The Vermont Marble handle is shaped and polished to blend with the blade.  Price of $200. includes a wooden display case and shipping to your USA address.  Part# 273-0093.

_____________________________________________________________________________

Obsidian Blade with Marble Handle  OAL 9 1/8"

Blade is made of Black Crystal w/Gold Sheen speckle Obsidian.  Handle is of Black & White Aguila Marble.  Blade is approximately 4 3/4" long with the handle being 4 3/8" long.  Hold this blade up to the light and you'll see the crystals highlite against the Opaque blade.


Sold




Rainbow Obsidian Blade with Marble Handle  OAL 8 3/4" 

This beauty is made of  Gray Rainbow Obsidian.  The edges are opaque, while the center of the blade shows dark gray bands when held up to the light.  The blade has a medium gray appearance and is approximately 5 1/4" long.  The uniquely shaped handle is made of White and Gray banded Aguila Marble.  The gray bands accentuate the medium gray.  The handle is approximately 3 1/2 " long and is about 1 7/8 " at its widest point.


Sold




Obsidian Blade with Marble Handle OAL 5 1/2"

$ 59.00 USD

 

This little beauty is made of Dark Chocolate Obsidian and has a piercing point.  The blade is approximately 3" long.  The Aquila Marble handle has an intermixed pattern of white, tan, brown, yellow, clear and black.  The handle is about 2 1/2" long.

Originally priced at $85 plus shipping...now


$50.00 plus $9.00 for Shipping to US addresses
                           Part#273-KN008 



Obsidian Blade with Marble Handle  OAL 6 1/2"

The dagger type blade is made of Black Crystal Obsidian which reveals superb colors and shades when held into natural light.  The blade is approximately 3 1/2" long.  The Aquila Marble handle is almost 99% pure white except for a couple of dark mineral spots along with shiny speckles which are highlighted in natural lighting.  The handle is about 3" long.

Originally priced at $100 plus shipping...now


$50.00 plus $9.00 for Shipping to US addresses
                            
Part#273-KN0012


Sold



Dover Blade w/Marble handle

$ 59.00 USD

Blade is of Dover Flint which is black in color. The cutting edge is about 3 1/2" long.  Nicely flaked and waxed.  The 3 1/2" long handle is Botticino Americano Marble.  Overall length is about 5 1/2".  Sleek and slendor design.  Price is $59 which includes shipping to your US address. 

 

Part# 273-KN0029

 

Obsidian Blade with Marble Handle OAL 5"

$ 49.00 USD

 

This skinning knife is made of Mahogany Obsidian and has a piercing point, with a 5/8" long cutting edge on the reverse end of the point.  The blade is approximately 2" long.  The Italian Carrera Marble handle has an intermixed pattern of white, tan, brown, yellow, light orange and black.  The handle is about 3" long.

Originally priced at $85 plus shipping...now


$40.00 plus $9.00 for  Shipping to US addresses
                            Part#273-KN0013 



Tri Flow Obsidian Blade with Marble Handle OAL 7 1/4"

$ 54.00 USD

Obsidian Blade with Marble Handle  OAL 7 1/4"

This dagger type blade is made of Tri Flow Obsidian.The front half of the blade is mahogany with some black stripes and blends beautifully into the Smoke portion of the blade, which is 3 3/4" long.  The Aquila Marble handle has an intermixed pattern of white, tan, brown, yellow, red and black.  The handle is about 3 1/2" long.

Originally priced at $110 plus shipping...now


$45.00 plus $9.00 for Shipping to US addresses
            Part#273-KN0014 



Obsidian Blade with Marble Handle  OAL 8 1/4" 

This knife will proudly display on your mantel.  The 4 1/2" long blade is of Black Crystal Sheen Obsidian.  Hold it up to the light and admire the beautiful display of sheen and opaque edges.   The Italian Carrera Marble handle has an intermixed pattern of white, tan, brown, yellow, light orange and black.  The handle is about 3 3/4" long.

Sold





USA Flag Dagger Knife w/ Case

$ 300.00 USD

This patriotic knife is made of a piece of Fiber Optic glass made in the image of our USA Flag.  Knife is shaped in a dagger style, is nicely flaked and is about 6" long.  The sodalite handle blends well with the blade.  It is nicely shaped and polished.  Overall length of the knife is 9" long.  The price of $300.00 includes a wooden display case and shipping to your USA address.  Part#273-0079.

_____________________________________________________________________________

Obsidian Blade with Marble Handle OAL 9"

$ 69.00 USD

 

The blade on this knife is of Dark Chocolate Obsidian.  The blade is approximately 5" long.  The Aquila Marble handle has an intermixed pattern of white, tan, brown, red, gray and black.  The handle is about 4" long.

Originally priced at $135 plus shipping...now


$60.00 plus $9.00 for  Shipping to US addresses
                             Part#273-KN0019 



US Flag Knife  OAL 9.6"

 This replica of the US Flag deserves a Salute.  Expertly flaked and sharpened, the blade is approximately 6" long, and about 1 1/2" wide. The 4" long handle is of Blue Sodalite.  Includes wooden display case.

Originally priced at $335 plus shipping...now


$329.00 plus $9.00 for Priority Mail Shipping to US addresses
                            Part#273-KN0021


Sold



Obsidian Blade with Marble Handle  OAL 5 1/4"

 The blade on this knife is of Dual-Flow Obsidian.  Patterns of Mahogany,  and black accent this skinning shaped  blade. The blade is approximately 2 1/4" long.  The Candy Onxy handle has an intermixed pattern of white, cream, and light yellow.  The handle is about 3" long.

Originally priced at $75 plus shipping...now


$40.00 plus $9.00 for  Shipping to US addresses
                            Part#273-KN0023

View Larger Image




Obsidian Blade with Hickoryite Handle  OAL 9 1/4"

 The blade on this knife is of Mahogany Obsidian.  Nicely knapped blade is approximately 4 3/4" long.  The Hickoryite (stone) handle has an intermixed pattern of cream, and several shades of brown/tan swirls and stripes.  The handle is about 4 1/2" long.

$329.00 plus $9.00 for foam padded wood display case and Shipping to US addresses
                            Part#273-KN0025

View Larger Image

 



Obsidian Blade with Marble Handle  OAL 5 1/2"

The blade on this knife is of Burns Green Obsidian.  This type of Obsidian is becoming harder and harder to find.  The blade is approximately 2 1/2" long.  The Marble handle has an intermixed pattern of white, cream, and several shades of green, ranging from light to dark.  The handle is about 3" long.

Sold

View Larger Image




Mookite Blade with Orange Calcite Handle  OAL 9 3/4"

 The blade on this knife is of Australian Mookite.  Nicely knapped blade is approximately 5" long.  There are deep reds, lite reds, yellows, creams, blacks, whites, and browns intermixed in a beautiful pattern.   Orange Calcite handle has an intermixed pattern of cream, and several shades of yellows and oranges.  The handle is about 4 3/4" long.

$339.00 includes foam padded wood display case and  Shipping to US addresses

                            Part#273-KN0026

View Larger Image

 



Obsidian Blade with Whitetail Deer Horn Handle


Knife blade is Mahogany Obsidian with a bit of golden sheen.  Deer horn handle has beautiful natural markings.  The Golden 'sinew adds a stunning contrast to the knife.  Blade is approximately 2 3/4" long;  the Handle is approximately  3 1/4" long.  The included base matches the knife with a deer horn fork support.

Originally priced at $39 plus shipping...now


$27.00 plus $9.00 for Priority Mail Shipping to US addresses.
                           Part#275-KN001 

View Larger Image

SOLD




Obsidian Blade with Mule Deer Horn Handle  OAL 7 1/2"

 Obsidian Knife made from Black and grey Obsidian, it has a handle with a eagle carving at the end. The length of the knife is 7 1/2 inches long, the stand is made from wood and deer antler, the handle is made from a mule deer antler.  With display.

Originally priced at $40 plus shipping...now


$28.00 plus $9.00 for Priority Mail Shipping to US addresses
                            Part#274-KN00EAGKN



Obsidian Blade with White Tail Horn Handle  OAL 9 1/4" 

The length of the knife is 9 1/4 inches long.  The blade  is made from Triple Flow Mahogany Obsidian. The handle is made of White Tail Horn, that when sanded turned Ivory Yellow color.  The blade is set into the handle with resin and then finished off with man made sinew. The stand is made from wood and antler, and matches the knife perfectly.  With display.

Originally priced at $50 plus shipping...now


$35.00 plus $9.00 for Priority Mail Shipping to US addresses
                            Part#274-KN00MAHKN


   SOLD



White Carrara Glass Double Blade Knife  OAL 8"

 A unique looking and shaped double ended Knife with an overall length of 7".  The long blade is 2.5" and the shorter blade is 1.75" long.  The Knife is Handle is wrapped using artificial sinew.

$40.00 plus $9.00 for Priority Mail Shipping to US addresses

                    Item is SOLD.        

View Larger Image




White Carrara Glass Double Blade Knife  OAL 8"

A unique looking and shaped double ended Knife with an overall length of 8".  Both blades are about 3 1/4 " long and about 1 1/2" wide.  The center handle is wrapped with artificial sinew.

$80.00 plus $9.00 for Priority Mail Shipping to US addresses

                            Part#274-KN0026


View Larger Image





White Carrara Glass oval knife with Deer Horn Handle OAL 5.5" 

This is a replica of an ancient Mayan knife used for ceremonial purposes.  The shape of the blade enhanced the easy slitting of the victims throats.  Glass blade is expertly knapped and is about 4.5 " from tip to tip.  The deer horn handle is attached using a modern resin and finished with artificial sinew.  Wood display stand is included.

Originally priced at $40 plus shipping...now


$30.00 plus $9.00 for Priority Mail Shipping to US addresses
                            Part#274-KN0027

View Larger Image


SOLD




Mahogany Obsidian Blade with Marble Handle  OAL 5.25"

This is a replica of an ancient Mayan knife used for ceremonial purposes.  The shape of the blade enhanced the easy slitting of the victims throats.  Obsidian blade is expertly knapped and is about 4 " from tip to tip.  The Italian Carrara Marble handle is shaped and polished to perfection.   
Wood display stand is included.

Originally priced at $60 plus shipping...now


$42.00 plus $9.00 for Priority Mail Shipping to US addresses
                            Part#274-KN0028

View Larger Image




Acrylic 'Mirrored' Display Case*

Acrylic display case is approximately 8 inches X 3 3/4 inches x 3 7/8 inches in size.  The bottom is mirrored for an added dimension for that special item which you wish to display.  This case will fit most of our knives.  An 8 1/4 inch knife will fit into this display when centered diagonally.  A larger display case will be available in the near future for our 'larger' knives.  Included with the case is an acrylic cradle with a couple pieces of double stick tape for securing the cradle onto the bottom of the display case.  This prevents the displayed item from moving when handling.  Knife in this display is not included.  When purchasing a Display Case with one of our knives, there is no additional shipping cost for the display.

$16.00 plus $9.00 for Priority Mail Shipping to US addresses

                            Part#300-31084

 





free templates

Make a free website with Yola